Enterprise

Short CPDLC Regression Run (Groups 1-3)

Scenario Locations

• sdrr4:/usr/local/scenarios/Enterprise
• sdrrdc:/usr/local/scenarios/Enterprise

SDRR Bring Up

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

Run Scenario Injector

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 1

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 1

• *Note need to hit enter twice to start injecting messages

Altys Bring Up

• Open rdesktop as peer3
  • Open the bat-files folder
  • Select: Enterprise-KSLC-Short-CPDLC-Groups1-3.bat - Shortcut

Additional Notes

• Ensure that Altys and the scenario injector are started as close to the same time as possible. If Altys is started too far ahead of sdrr scenario then the logins will be entered before flight plans which will cause them to be rejected.

Extended CPDLC Regression Run (Groups 4a-b, 5)

Scenario Locations

• sdrr4:/usr/local/scenarios/Enterprise
• sdrrdc:/usr/local/scenarios/Enterprise

SDRR Bring Up

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

Run Scenario Injector

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 4a

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 4a

• *Note need to hit enter twice to start injecting messages

Altys Bring Up

• Open rdesktop as peer3
  • Open the bat-files folder
  • Select: Enterprise-KSLC-Extended-CPDLC-Groups4-5.bat - Shortcut

Additional Notes

• Ensure that Altys and the scenario injector are started as close to the same time as possible. If Altys is started too far ahead of sdrr scenario then the logins will be entered before flight plans which will cause them to be rejected.

Fallback to PDC Run (Groups 12a-e )

Scenario Locations

• sdrr4:/usr/local/scenarios/Enterprise
• sdrrdc:/usr/local/scenarios/Enterprise

SDRR Bring Up

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

Run Scenario Injector

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 12a

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 12a

• *Note need to hit enter twice to start injecting messages

Altys Bring Up

• Open rdesktop as peer3
  • Open the bat-files folder
  • Select: Enterprise-KSLC-Fallback-PDC-Group12.bat - Shortcut

Additional Notes

• Ensure that Altys and the scenario injector are started as close to the same time as possible. If Altys is started too far ahead of sdrr scenario then the logins will be entered before flight plans which will cause them to be rejected.

KBOI Manual CPDLC/PDC Run (Groups 21 & 22)

Scenario Locations

• sdrr4:/usr/local/scenarios/Enterprise
• sdrrdc:/usr/local/scenarios/Enterprise

SDRR Bring Up

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

Run Scenario Injector

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 21

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 21

• *Note need to hit enter twice to start injecting messages

Altys Bring Up

• Open rdesktop as peer3
  • Open the bat-files folder
  • Select: Enterprise-KBOI-Manual-CPDLC-PDC-Groups21-22.bat - Shortcut

KBOI Logons Runs - Nominal (Group 25)

Scenario Locations

• sdrr4:/usr/local/scenarios/Enterprise
• sdrrdc:/usr/local/scenarios/Enterprise

SDRR Bring Up

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

Run Scenario Injector

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 25

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 25

• *Note need to hit enter twice to start injecting messages

Altys Bring Up

• Open rdesktop as peer3
  • Open the bat-files folder
  • Select: Enterprise-KBOI-Logons-Nominal-Group25.bat - Shortcut

KBOI Logons Runs - Non-Nominal (Group 26)

Scenario Locations

• sdrr4:/usr/local/scenarios/Enterprise
• sdrrdc:/usr/local/scenarios/Enterprise

SDRR Bring Up

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr

Run Scenario Injector

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 26

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Execute injector script:
  • Using port 9601: ./enterprise-msg-inj -g "group #"
  • Using port 9602: ./enterprise-msg-inj-9602 -g "group #"
    • Example: ./enterprise-msg-inj -g 26

• *Note need to hit enter twice to start injecting messages

Altys Bring Up

• No Altys scenario, test uses avionics CMUs

Enterprise Regression 510

Scenario Locations

• sdrr4:/usr/local/scenarios/EnterpriseRegression-510
• sdrrdc:/usr/local/scenarios/EnterpriseRegression-510

SDRR Bring Up

• For TB4
  • Login to sdrr4 as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr-510

• For VTL
  • Login to sdrrdc as task23/task50
  • cd Enterprise
  • Launch sdrr: ./runsdrr
    • ensure that ./runsdrr includes option --cmdDev=udp:localhost/9603

Injector Scripts

cd /usr/local/scenarios/EnterpriseRegression-510

• Start with
  • runInjector1
• When prompted <ctrl-c> runInjector1 and execute
  • runInjector2

Altys Bring Up

• No Altys scenario, test uses SDRR avionics. If running with real DCNS then DCNS 1 is required for SDRR to inject messages via the MPG

back to: DatacommProcedures