Failure Recovery

Scenario Locations

• sdrr4:/usr/local/scenarios/Failure-Recovery
• sdrr3:/usr/local/scenarios/Failure-Recovery
• sdrrdc:/usr/local/scenarios/Failure-Recovery

Bring up Altys

• Open rdesktop as peer3
• Start PEERMaster
  • Select MasterConf file for Radios 3 and 4
  • EACP File: /PEER3/work/ScenarioMng/ScenarioFiles/Failure_Recovery/Failure-Recovery_r3_r4.eacp
  • Groups File: /PEER3/work/ScenarioMng/Groups/Groups-Failure_Recovery.xml

Bring up SDRR

• For SLC/TB4
  • task23@sdrr4:~/Failure-Recovery/zlc/runsdrr-zlc
• for HOU/TB3:
  • task23@sdrr3:~/Failure-Recovery/zhu/runsdrr-zhu

Run msg injector

• For SLC/TB4:
  • task23@sdrr4:~/Failure-Recovery/zlc/zlc-failure-recovery-msg-inj
• For HOU/TB3:
  • task23@sdrr3:~/Failure-Recovery/zhu/zhu-failure-recovery-msg-inj
• Groups 10 and 11 are only on SLC. So, for example, if they requested that you run groups 1 for SLC and HOU and group 10 you would have 3 instances of the msg injector running in 3 different xterm windows as follows:
  • task23@sdrr4:~/Failure-Recovery/zlc/zlc-failure-recovery-msg-inj -g 1
  • task23@sdrr4:~/Failure-Recovery/zlc/zlc-failure-recovery-msg-inj -g 10
  • task23@sdrr3:~/Failure-Recovery/zhu/zhu-failure-recovery-msg-inj -g 1

back to: DatacommProcedures