| | 1 | = Lab Setup = |
| | 2 | |
| | 3 | == RUN SETUP == |
| | 4 | === EIB === |
| | 5 | * Execute eibGenGui |
| | 6 | * Copy top level dir to correct stp |
| | 7 | * Execute generateEib.ksh |
| | 8 | * Setup eib displays – relay and xdisplays (if using them) |
| | 9 | |
| | 10 | === PCRCU === |
| | 11 | * Ensure PCRCU line is in sdrr cfg file |
| | 12 | * Remove patch cable from pcrcu panel |
| | 13 | * Login to pcrcu5 and change port from pp0 to eth0 |
| | 14 | * Ensure printer has paper |
| | 15 | |
| | 16 | === TDLS/TIMS === |
| | 17 | * Apply TDLS Adaptation |
| | 18 | * !Enable/Disable Interfaces (ex: tedc, tims) |
| | 19 | * !Enable/Disable CPDLC/PDC automode |
| | 20 | * Confirm in configurations table on TDLS |
| | 21 | * file_poll_tm is set to: 200 |
| | 22 | * PDC_FLIGHTID (mul timer) is set to: 3600,PROHIBIT |
| | 23 | * Point TDLS to STP |
| | 24 | * Configure TIMS Test String |
| | 25 | * Clear Tables and Reboot |
| | 26 | |
| | 27 | == RUN EXECUTION == |
| | 28 | * Bring up SDRR |
| | 29 | * Bring up EIB |
| | 30 | * Execute ./runeib from top level |
| | 31 | * Execute psim/ssim |
| | 32 | * Record Start Time and Issues |
| | 33 | * Bring up FDIO and DCL on TDLS |
| | 34 | * Create Status Note |
| | 35 | |
| | 36 | == RUN COMPLETION == |
| | 37 | * Run capturelogs |
| | 38 | * Send note to ERAM users to collect EIB SAR |
| | 39 | * Send lab status |
