| 3 | | == RUN SETUP == |
| 4 | | === EIB === |
| 5 | | * Execute eibGenGui |
| 6 | | * Copy top level dir to correct stp |
| 7 | | * Execute generateEib.ksh |
| 8 | | * Setup eib displays – relay and xdisplays (if using them) |
| | 3 | == ERAM == |
| | 4 | * 4 hour logon timer set |
| | 5 | * nadx timer set in nadx_local_preset.xml |
| | 6 | * NSDA address correct (either local, KUSA, KUSC) |
| | 7 | * setup PC/RCU to either test beds or vtl |
| | 8 | * make sure printer has paper |
| | 9 | * make sure DCNS interface connected |
| 10 | | === PCRCU === |
| 11 | | * Ensure PCRCU line is in sdrr cfg file |
| 12 | | * Remove patch cable from pcrcu panel |
| 13 | | * Login to pcrcu5 and change port from pp0 to eth0 |
| 14 | | * Ensure printer has paper |
| | 11 | == TDLS/TIMS == |
| | 12 | * TDLS pointed to correct TIMS test string |
| | 13 | * TDLS pointed to correct ERAM lab |
| | 14 | * NSDA address correct (either local, KUSA, KUSC) |
| | 15 | * TDLS schema version correct |
| | 16 | * TDLS session delay termination timer set to correct value |
| | 17 | * TDLS(a/b) databases in sync |
| | 18 | * TDLS adaptation set |
| | 19 | * TDLS automode set on/off |
| 16 | | === TDLS/TIMS === |
| 17 | | * Apply TDLS Adaptation |
| 18 | | * !Enable/Disable Interfaces (ex: tedc, tims) |
| 19 | | * !Enable/Disable CPDLC/PDC automode |
| 20 | | * Confirm in configurations table on TDLS |
| 21 | | * file_poll_tm is set to: 200 |
| 22 | | * PDC_FLIGHTID (mul timer) is set to: 3600,PROHIBIT |
| 23 | | * Point TDLS to STP |
| 24 | | * Configure TIMS Test String |
| 25 | | * Clear Tables and Reboot |
| 26 | | * To access database on tdls: mysql -uaos -pfrodo |
| 27 | | * For stability check database for these values |
| 28 | | * HOURS_TO_RETAIN_FLIGHTS : 18 |
| 29 | | * PDC_FLIGHTID : 64800,PROHIBIT |
| 30 | | |
| 31 | | == RUN EXECUTION == |
| 32 | | * Bring up SDRR |
| 33 | | * Bring up EIB |
| 34 | | * Execute ./runeib from top level |
| 35 | | * Execute psim/ssim |
| 36 | | * Record Start Time and Issues |
| 37 | | * Bring up FDIO and DCL on TDLS |
| 38 | | * Create Status Note |
| | 21 | == SDRR == |
| | 22 | * make sure relay and xdisplays running (vtl only) |
| | 23 | * make sure sdrr running before loading eib (vtl only) |
