| 5 | | * Disable "cms handoff tracking" for the flight in '''Dysim''' |
| 6 | | * Navigate to the '''ARTS''' tab in '''SDRR*''' |
| 7 | | * Click "ResponseControl" |
| 8 | | * Select "None" |
| 9 | | * Enter Acid |
| | 5 | ***IMPORTANT*** |
| | 6 | Immediately following the DA message you will have 20 seconds to input the TA message. |
| | 7 | |
| | 8 | ***TIP*** |
| | 9 | In the '''ARTS''' tab open both the "Respons Control" and "Send Msg" windows prior to handoff. |
| | 10 | 1. Disable "cms handoff tracking" for the flight in '''Dysim''' |
| | 11 | 2. Navigate to the '''ARTS''' tab in '''SDRR*''' |
| | 12 | a. Click "'''Response Control'''" |
| | 13 | b. Select "None" |
| | 14 | c. Enter Acid |
| | 15 | d. Click "OK" |
| | 16 | * Repeat steps b-d |
| | 17 | 3. Wait for the handoff to '''ARTS''' |
| | 18 | * Signaled by the '''TI''' message in the '''ARTS''' |
| | 19 | 4. Immediately respond to '''TI''' message with a DA message... |
| | 20 | * "'''DA @@@ [reference number]'''" |
| | 21 | * e.g. '''DA @@@ ZCM123456''' |
| | 22 | * Reference number should correspond to the TI message |
| | 23 | 5. Immediately send a TA message... |
| | 24 | * "'''TA [CID]'''" |
| | 25 | * e.g. '''TA 001''' |