[[PageOutline(2)]]
= TOC =

== Scenario Bring Up ==
==== SDRR2/4 Bring Up ====
* Open Firefox web browser
* Go to 172.26.87.63 (NO VNC)
* Choose appropriate SDRR
* cd S1P2/ZKC/
* Launch sdrr: ./runsdrr

==== SDRR3 Bring Up ====
* Choose SDRR3 in NO VNC
* cd S1P2/ZID-ZME/
* Launch sdrr: ./runsdrr


***NOTE: SDRR's must be up before bringing up dysim


==== Dysim Bring Up ====
* Choose UCTI/FM in NO VNC
* cd scenarios-datacomm/S1P2-TOC-ZKC-ZID-ZME
* Execute: ./runDysim


==== Lab Start ====
* Ensure lab PSIM/SSIM complete 
* Click start on the Dysim

== Manual Handoff Tracking ==
***IMPORTANT***
Immediately following the DA message you will have 20 seconds to input the TA message. 

***TIP***
In the '''ARTS''' tab open both the "Response Control" and "Send Msg" windows prior to handoff.
1. Disable "cms handoff tracking" for the flight in '''Dysim'''
  * Right click on flight > Disable cms handoff tracking
2. Navigate to the '''ARTS''' tab in '''SDRR*'''
  a. Click "'''Response Control'''"
  b. Select "None"
  c. Enter Acid
  d. Click "OK"
    * Repeat steps b-d
3. Wait for the handoff to '''ARTS'''
  * Signaled by the '''TI''' message in the '''ARTS'''
4. Immediately respond to '''TI''' message with a DA message...
    * "'''DA @@@ [reference number]'''"
      * e.g. '''DA @@@ ZCM123456'''
    * Reference number should correspond to the TI message
5. Immediately send a TA message...
      * "'''TA [CID]'''"
        * e.g. '''TA 001'''