[[PageOutline(2)]]
= OPS Eval Terminal Test =

== Scenario ==
* git: '''UCSE-MAIN'''
* After fresh checkout copy source dir to '''/usr/local/scenarios/''' on sdrr you are using
  * will be sdrr2 or sdrr4

== SDRR2/4 Bring Up ==
* Use VNC to login to sdrr'''2/4''' as task23
  * vncconnect sdrr'''2/4''' -u task23

* cd S1P2/ZKC/
* Launch sdrr: ./runsdrr

== SDRR3 Bring Up ==
* Use VNC to login to sdrr'''3''' as task23
  * vncconnect sdrr'''3''' -u task23

* cd S1P2/ZID-ZME/
* Launch sdrr: ./runsdrr


***NOTE: SDRR's must be up before bringing up dysim


== Dysim Bring Up ==
* Login to sdrr2/4
* cd /usr/local/scenarios/UCSE-MAIN/ 
* Execute: ./runDysim


== Lab Start ==
* Ensure lab PSIM/SSIM complete 
* Click start on the dysim
* System commands will get injected, but no flights will get injected until manually released by user.

== Scenario Format ==
* All the terminal flights are on RSI 800+
* They follow the following naming convention:
  * EX: TCN1R1
    * tracon scenario 1, release eligibility 1
  * EX: TCN1T1
    * tracon scenario 1, transfer of control 1

== Additional Notes ==
=== Tracon handoffs (TI Messages) === 
* All handoffs from the tracons-ERAM and tracon-tracon must be done manually in dysim 
 * Open the messages window for the target you want and select the "Messages" tab.
 * For the Type select ifmsg
 * Enter the originating tracon in the first blank box (ex: sgf)
 * Enter the facility destination in the second blank box (ex: ZKC)
 * Right-click the test box and select "Create TI Message"
 * This will populate the box with a TI message from the Tracon. 
   * example: TI K00 @@@ (0,0)(0,0) SGF1S 
   * The K00 is the destination and can be modified to Facility[sector] you want

=== Host-Non-Host Handoffs ===
* If a target is currently owned by a tracon in one facility but is then handing off to a ERAM sector in a different facility the TI message needs to be slightly modified.
  * For Example: Flight is owned by ZKC tracon SGF, and needs to be handed off to ZME sector 25. The following would apply:
   * Originating Box: SGF
   * Destination Box: ZKC
   * Modify TI message to send to ZME instead of ZKC: TI M00 @@@ (0,0)(0,0) SGF1S

* [wiki:Terminal-pics Examples ]