= Configuring EIB to run in the ZTV Lab =


== eibGenGui Setup ==
Example: 3 site key site configuration: ZKC (local & nap), ZID (local) and ZME (local)

* Execute '''eibGenGui''' from sdrrdc/tgfsdrr1
   * Select all options needed to create ZID/ZME/ZKC local release harnesses and the ZKC nap harness
   * Select the desired stp under the "ztv" section of the drop down
      * click [wiki:ztv_eib (here)] for sample screen shots
      * click [attachment:zkc-zid-zme-ucse.ini here] to download sample ini file
   * Click generate

* Copy the created eib top level directory to the stp and sdrr

== STP Setup ==
* On stpXX.ztv in the eib dir execute: ./generateEib.ksh
* Make sure the ''setup_override_displays'' file is executable -rwxr-xr-x
   * This file will setup your displays for running in the ztv lab only
   * When using eibGenGui you should specify which displays you want to use and it will automatically created this file. However, if needed this file can be modified to make changes.
   * Click [attachment:setup_override_displays here] for an example setup_override_displays file

* Your eram software is now ready to start, however need to do some additional things before executing ./runeib

== Lab Displays Setup ==
* In the ztv display lab you will need to login to each of the displays that you intend on using for your RPOS/DPOS/ATS/MCWS displays
   * These displays are all labeled with IP Addresses that should match what is in your setup_override_displays file
* You will need to open the appropriate script depending on what you intend that position to be (ex: RPOS/DPOS, etc)
   * Example script files located: /home/vtl/phillich/Example-SDRR-DISPLAYS
      * Copy this directory into your home /Desktop dir

== SDRR Setup ==
* Ensure that you successfully completed the step above to copy your newly created eib top level to the sdrr
* Login to the sdrr, change directory to your top level sdrr dir
   * execute ./runsdrr

== DYSIM Setup ==
* The dysim needs to be executed from within your scenario source directory
* For running DYSIM mode we actually execute a script called ''eramDriver''
* Change directory into your scenario source dir and execute eramDriver script
   * eramDriver can take many options just like for example sdrr. See below for an example:

'''Example:'''
eramDriver --tgtOutDev="tcp:tgfsdrr1/9605" --sdrrCmdDev="tcp:tgfsdrr1/9606" --fac="zid,tcps:9607" --fac="zkc,tcps:9608" --fac="zme,tcps:9609" --cmuDev=tcp:tgfsdrr1/9800

== Bringup ==
* You will want to load everything in the following order:
   * EIB display scripts
   * sdrr (./runsdrr)
   * dysim (./eramDriver)
   * stp (./runeib)

* Once everything is loaded need to do a PSIM/SSIM on EIB and make sure you see the messages in the sdrr ssrv tabs
* Finally just click ''Start'' on the dysim window and your scenario will begin


[[BR]]
[[BR]]
back to: DatacommProcedures