Changes between Version 4 and Version 5 of eibGenGui

Timestamp:

2017-10-17T09:15:03-04:00 (8 years ago)

Author:

Hoan Nguyen

Comment:

--

eibGenGui

@@ -4 +4 @@
 
 === DataComm Resources ===
-==== SDRR ==== 
-Select the SDRR according to your scenario configuration.
-==== STP ====
-Select the STP on which you will run.
-==== DCNS ====
-Select the DCNS according to your scenario configuration --Live or Simulated.
-==== PEER ====
-Select a PEER only if your scenario requires ALTYS.
-==== PCRCU ====
-* 
-==== Real TDLS ====
-Check this box if you're configured for live TDLS and select the appropriate site.
+'''SDRR:'''  Select the SDRR according to your scenario configuration.
+
+'''STP:''' Select the STP on which you will run.
+
+'''DCNS:''' Select the DCNS according to your scenario configuration --Live or Simulated.
+
+'''PEER:''' Select a PEER only if your scenario requires ALTYS.
+
+'''PCRCU:''' Select which interface to connect to the FDIO.
+
+'''Real TDLS:''' Check this box if you're configured for live TDLS and select the appropriate site.
+
+'''Simulated TDLS:''' Check this box if you're going to simulate TDLS.
+  '''TDLS Tower:''' Enter a TDLS tower. (e.g. kslc or KSLC)
+  
+  '''TDLS Schema Version:''' Enter the TDLS schema version for the chosen TDLS tower.
+
 === MISC ===
-==== SDRR Scenario ====
-Define the location for SDRR scenario. (e.g. /usr/local/scenarios/Stability-CPDLC/sdrr.xml)
-==== Script Definitions ====
-Define the location for script definitions. (e.g. /usr/local/scenarios/scenarios/scriptDefinitions.xml)
-==== Aircraft Logon ====
-Select the appropriate logon type for your scenario.
-==== User Number ====
-Input your user number. Hover the mouse over this field to display a list of user numbers and their associated user names.
-==== Output Directory ====
-Define the name of the generated directory.
-==== NADX Del Time(m) ====
-* 
-==== 4hr Logon Timer ====
-Select if running with 4hr Logon Timer.
-==== EIB Auto Start ====
-Select if auto PSIM/SSIM is desired.
-==== Ignore Start Sim ====
-Select if you want SDRR to ignore the SSIM.
-== Dysim ==
-Select if running with Dysim.
-==== enableTDLSExport ====
-Select to enable TDLS export.
-==== cpdlcManualMode ====
-Select to enable CPDLC Manual Mode.
-==== setIndependentRelease ====
-Select to set Independent Release for all targets in the scenario.
-==== disableToggleFreq ====
-Select to disable Toggle Frequency.
-==== cpdlcResponseDelay(s) ====
-Select default CPDLC repsonse delay (value in seconds).
-==== RSI Values ====
-Define which RSI values you wish to enable in a comma separated list.
-==== DisableRSI ====
-Define which RSI values you wish to disable in a comma separated list.
-==== simPilotPort ====
-Select 4 digit number for the Sim Pilot Port for Eram Driver.
-==== TGF DIS Port ====
-Select 4 digit port number for the DIS TGF Target Position Reports.
+'''SDRR Scenario:''' Define the location for SDRR scenario. (e.g. /usr/local/scenarios/Stability-CPDLC/sdrr.xml)
+
+'''Script Definitions:''' Define the location for script definitions. (e.g. /usr/local/scenarios/scenarios/scriptDefinitions.xml)
+
+'''Aircraft Logon:''' Select the appropriate logon type for your scenario.
+
+'''User Number:''' Input your user number. Hover the mouse over this field to display a list of user numbers and their associated user names.
+
+'''Output Directory:''' Define the name of the generated directory.
+
+'''NADX Del Time(m):''' Define how long a flight will stay in logon storage before it is deleted.
+
+
+'''4hr Logon Timer:''' Select if running with 4hr Logon Timer.
+
+'''EIB Auto Start:''' Select if auto PSIM/SSIM is desired.
+
+'''Ignore Start Sim:''' Select if you want SDRR to ignore the SSIM.
+
+'''Dysim:''' Select if running with Dysim.
+
+'''enableTDLSExport:''' Select to enable TDLS export.
+
+'''cpdlcManualMode:''' Select to enable CPDLC Manual Mode.
+
+'''setIndependentRelease:''' Select to set Independent Release for all targets in the scenario.
+
+'''disableToggleFreq:''' Select to disable Toggle Frequency.
+
+'''cpdlcResponseDelay(s):''' Select default CPDLC repsonse delay (value in seconds).
+
+'''RSI Values:''' Define which RSI values you wish to enable in a comma separated list.
+
+'''DisableRSI:''' Define which RSI values you wish to disable in a comma separated list.
+
+'''simPilotPort:''' Select 4 digit number for the Sim Pilot Port for Eram Driver.
+
+'''TGF DIS Port:''' Select 4 digit port number for the DIS TGF Target Position Reports.
+
 == !Facilities/Displays ==
-*
+'''NAP:''' Double click the cell under NAP/Adaptation to select a NAP.
+
+'''Local Site:''' Double click the cell under Local !Site/Adaptation to choose a local site. You must select a Local Site in order to fill in the cells for R Pos, D Pos, and ATS.
+
+'''R Pos:''' Double click to specify live R Pos sectors as a comma separated list.
+
+'''D Pos:''' Double click to specify live D Pos sectors as a comma separated list.
+
+'''ATS:''' Double click to specify live ATS positions as a comma separated list.
+
+'''MCWS:''' Check this box if you want to run with a graphical MnC.
+
+'''Add:''' Click the ADD button if you wish to include more Local Sites.
+
+'''Delete:''' Select a Local Site and click the Delete button if you wish to remove it.
+
+== Terminal Facilities ==