TOC

Scenario Bring Up

SDRR2/4 Bring Up

• Open Firefox web browser
• Go to 172.26.87.63 (NO VNC)
• Choose appropriate SDRR
• cd S1P2/ZKC/
• Launch sdrr: ./runsdrr

SDRR3 Bring Up

• Choose SDRR3 in NO VNC
• cd S1P2/ZID-ZME/
• Launch sdrr: ./runsdrr

*NOTE: SDRR's must be up before bringing up dysim

Dysim Bring Up

• Choose UCTI/FM in NO VNC
• cd scenarios-datacomm/S1P2-TOC-ZKC-ZID-ZME
• Execute: ./runDysim

Lab Start

• Ensure lab PSIM/SSIM complete
• Click start on the Dysim

Manual Handoff Tracking

*IMPORTANT* Immediately following the DA message you will have 20 seconds to input the TA message.

*TIP* In the ARTS tab open both the "Response Control" and "Send Msg" windows prior to handoff.

1. Disable "cms handoff tracking" for the flight in Dysim
   • Right click on flight > Disable cms handoff tracking
2. Navigate to the ARTS tab in SDRR*
   1. Click "Response Control"
   2. Select "None"
   3. Enter Acid
   4. Click "OK"
      • Repeat steps b-d
3. Wait for the handoff to ARTS
   • Signaled by the TI message in the ARTS
4. Immediately respond to TI message with a DA message...
   • "DA @@@ [reference number]"
     • e.g. DA @@@ ZCM123456
   • Reference number should correspond to the TI message
5. Immediately send a TA message...
   • "TA [CID]"
     • e.g. TA 001