OPS Eval Terminal Test

Scenario

• git: UCSE-MAIN
• After fresh checkout copy source dir to /usr/local/scenarios/ on sdrr you are using
  • will be sdrr2 or sdrr4

SDRR2/4 Bring Up

• Use VNC to login to sdrr2/4 as task23
  • vncconnect sdrr2/4 -u task23

• cd S1P2/ZKC/
• Launch sdrr: ./runsdrr

SDRR3 Bring Up

• Use VNC to login to sdrr3 as task23
  • vncconnect sdrr3 -u task23

• cd S1P2/ZID-ZME/
• Launch sdrr: ./runsdrr

*NOTE: SDRR's must be up before bringing up dysim

Dysim Bring Up

• Login to sdrr2/4
• cd /usr/local/scenarios/UCSE-MAIN/
• Execute: ./runDysim

Lab Start

• Ensure lab PSIM/SSIM complete
• Click start on the dysim
• System commands will get injected, but no flights will get injected until manually released by user.

Scenario Format

• All the terminal flights are on RSI 800+
• They follow the following naming convention:
  • EX: TCN1R1
    • tracon scenario 1, release eligibility 1
  • EX: TCN1T1
    • tracon scenario 1, transfer of control 1

Additional Notes

Tracon handoffs (TI Messages)

• All handoffs from the tracons-ERAM and tracon-tracon must be done manually in dysim
  • Open the messages window for the target you want and select the "Messages" tab.
  • For the Type select ifmsg
  • Enter the originating tracon in the first blank box (ex: sgf)
  • Enter the facility destination in the second blank box (ex: ZKC)
  • Right-click the test box and select "Create TI Message"
  • This will populate the box with a TI message from the Tracon.
    • example: TI K00 @@@ (0,0)(0,0) SGF1S
    • The K00 is the destination and can be modified to Facility[sector] you want

Host-Non-Host Handoffs

• If a target is currently owned by a tracon in one facility but is then handing off to a ERAM sector in a different facility the TI message needs to be slightly modified.
  • For Example: Flight is owned by ZKC tracon SGF, and needs to be handed off to ZME sector 25. The following would apply:
    • Originating Box: SGF
    • Destination Box: ZKC
    • Modify TI message to send to ZME instead of ZKC: TI M00 @@@ (0,0)(0,0) SGF1S

• Examples